Print
Our EXTRA-BOND is a water-based polymer emulsion. When added to Milk Paint it gives the paint greater adhesion to non-porous or previously finished surfaces. As an adjunct to Milk Paint, it is used by custom furniture builders, interior designers, craftsmen, and do-it-yourselfers on difficult surfaces. It is environmentally safe and non-toxic, hypo-allergenic, low odor and voc-free.
APPLICATIONS
EXTRA-BOND is mixed with Milk Paint before painting on surfaces such as glass, baked enamel, primed metal, oil or latex painted surfaces, varnished, shellacked or polyurethaned surfaces.
ADVANTAGES
- Easy to use
- Long shelf life
- Completely environmentally safe and non-toxic
- Non-flammable
- No odor when dry
- Easily cleaned up with water
- Fast drying
- Long shelf life
PHYSICAL CHARACTERISTICS
| Color: White; dries clear/satin | VOC'S: None |
| Consistency: Viscosity of heavy cream | Clean Up: Soap and Water |
| Temperature: Best brushing consistency at 70° F to 85° F (room temperature) | Drying Time: Approximately one hour |
| Combustibility: Non-combustible | Freeze/Thaw Stability: None |
| Shelf Life: 1 to 2 years at room temperature | Important: Do not allow to freeze |
APPLICATION TECHNIQUES
Please Note: Two rules should always be followed in the application of MILK PAINT with Extra-Bond, or of any other finish for that matter:
| a} | Make sure the surface is perfectly clean. |
| b} | First test the Milk Paint with Extra-Bond added on a scrap piece of the same surface material. |
| 1} | Thoroughly clean the surface to be painted. Use a cleaner that does not leave a soapy or oily residue such as TSP. Hard shiny surfaces should be dulled somewhat with Scotchbrite, sand-paper or steel wool. |
| 2} | Measure out equal parts of mixed Milk Paint and EXTRA-BOND. Mix together. You may actually use as little as one part EXTRA-BOND to two parts Milk Paint, but better adhesion may be achieved using equal parts. |
| 3} | If a second coat of Milk Paint is desired allow two hours between coats. EXTRA-BOND is not necessary in the second coat. |
| 4} | Clean up with water. EXTRA-BOND should be stored at room temperature with the lid on tight. |
AVAILABLE SIZES
| one pint (liquid measure) |
| one quart (liquid measure) |
| one gallon (liquid measure) |
| A Material Safety Data Sheet for this product is available. |
More Decorative Finish Recipes:
Non-toxic Pigments, Binders and Mediums